C-TEC 10 Zone Master Call Controller (Surface Version)

Mains supply: 230V 50/60Hz. (36mA max. current) Internal power supply: 11V d.c. (300mA max. current when powered by Mains) Product dimensions (mm)...

In stock

SKU NC910S

Product Details

Housed in an attractive surface mounting plastic enclosure measuring just 214mm x 178mm
Two call levels – standard (constant tone) and emergency (intermittent tone)
‘Call Accept’ functionality allows staff to send an intermittent call acknowledgment signal to calling zones to confirm help is on the way (dependent on wiring and field devices used)
Includes a 12V 300mA PSU and 2 volt-free relay contacts which activate on a standard or emergency call
Innovative slide-in labelling system
Additional master controllers and expansion units available for use as repeaters on larger sites
Optional boxed PSUs c/w with space for a 12V VRLA battery available for sites where a standby battery facility is required

Brands	C-Tec
Indicators	Green Power on LED; 10 x red Zonal Alarm LEDs (lit steady for a Standard call, pulse for an Emergency call); Internal buzzer (on steady for any Standard call, intermittent for any Emergency call)
Controls	2 Buttons – (A) Reset or inactive ; (B) 'Mute' or 'Call Accept'. (Both buttons are link selectable). If Call Accept is selected indicators on relevant field devices will emit a slow intermittent to
Quiescent Current	0mA (none)
Alarm Current	Determined by the number/type of field devices connected to the call controller/system
IP Rating	IP41
Dimensions	214 x 178 x 70 mm. Surface mounting
Constructions	Plastic detachable lid and back box. RAL7035
Operating Temperature	-5 to 40ºC

My Basket