calcPageSize())"
/>
calcPageSize())"
class="absolute inset-0 object-contain object-center w-full m-auto max-h-screen-75"
:class="{ 'cursor-pointer': !fullscreen }"
width="700"
height="700"
:loading="active!==index ? 'lazy' : 'eager'"
:src="fullscreen ? image.full : image.img"
x-transition.opacity.duration.500ms x-show="active===index"
/>
calcActive())">
C-TEC Standard Call Push with Protruding Button
Alarm current: Determined by the type of control equipment and number / type of field devices connected to the system
Indicators: Red Reassurance L...
- Alarm current: Determined by the type of control equipment and number / type of field devices connected to the system
- Indicators: Red Reassurance LED (lit constant for Standard calls)
- Controls: Red protruding call button (generates a Standard call when pressed). An additional 800 Series device with a reset function is required to reset this device
- Connections: SIG (Signal); -Ve (Negative)
- Product dimensions (mm): 87 x 87 x 32. Mounts on a UK 25mm single gang back box
- Construction & finish: Plastic
- IP Rating: IP41
- Weight: 62g
- Operating conditions/temperature: -5 to 40ºC
In stock
SKU
NC917L
Product Details
- A standard call point c/w protruding button for use with C-TEC’s 800 Series Call System
- Red reassurance LED confirms a call has been made
- Requires a separate reset point for cancelling calls
- Mounts on a standard UK 25mm single gang flush or surface back box
Brands | C-Tec |
---|---|
Indicators | Red Reassurance LED (lit constant for Standard calls) |
Controls | Red protruding call button (generates a Standard call when pressed). An additional 800 Series device with a reset function is required to reset this device |
Quiescent Current | 0mA |
Alarm Current | Determined by the number/type of field devices connected to the call controller/system |
IP Rating | IP41 |
Dimensions | 87 x 87 x 32 mm. Mounts on a UK 25mm single gang back box |
Constructions | Plastic |
Operating Temperature | -5 to 40ºC |
Write Your Own Review
Product Questions
focusElement());"
class="btn btn-primary ml-2">